In this work, Nusselt number and friction factor are calculated numerically for turbulent pipe flow (Reynolds number between 6000 and 12000) with constant heat flux boundary condition using nanofluids. The nanofluid is modelled with the single-phase approach and the simulation results are compared with experimental data. Ethylene glycol and water, 60:40 EG/W mass ratio, as base fluid and SiO2 nanoparticles are used as nanofluid with particle volume concentrations ranging from 0% to 10%. A prior turbulence model evaluation of k-ε-, k-ω- and k-ω-SST-model revealed substantial deviations between the tested models and resulted in applying the k-ω-SST-model for the simulation. Nusselt number predictions for the nanofluid are in agreement with experimental results and a conventional single-phase correlation. The mean deviation is in the range of 5%. Friction factor values show a mean deviation of 1.5% to a conventional single-phase correlation, however, they differ considerably from the nanofluid experimental data
Autorzy
- Hendrik Boertz,
- Prof. Albert Baars,
- prof. dr hab. inż. Janusz Cieśliński link otwiera się w nowej karcie ,
- Sławomir Smoleń
Informacje dodatkowe
- DOI
- Cyfrowy identyfikator dokumentu elektronicznego link otwiera się w nowej karcie 10.4028/amm831
- Kategoria
- Publikacja w czasopiśmie
- Typ
- artykuły w czasopismach recenzowanych i innych wydawnictwach ciągłych
- Język
- angielski
- Rok wydania
- 2016