Repozytorium publikacji - Politechnika Gdańska

Low-coherence sensors using Fabry-Perot interferometers are finding new applications in biophotonic sensing, especially due to the rapid technological advances in the development of new materials. In this paper we discuss the possibility of using boron-doped nanodiamond layers to protect mirror in a Fabry-Perot interferometer. A low-coherence sensor using Fabry-Perot interferometer with a boron-doped nanodiamond (B-NCD) thin protective layer has been developed. B-NCD layers with different boron doping level were investigated. The boron level, expressed as the boron to carbon (/[C]) ratio in the gas phase, was: 0, 2000, 5000 or 10000 ppm. B-NCD layers were grown by chemical vapor deposition (CVD). The sensing Fabry-Perot interferometer, working in the reflective mode, was connected to the source and to the optical processor by single-mode fibers. Superluminescent diodes with Gaussian spectral density were used as sources, while an optical spectrum analyzer was used as an optical processor. The design of the sensing interferometer was optimized to attain the maximum interference contrast. The experiment has shown that B-NCD thin layers can be successfully used in biophotonic sensors.

Autorzy

• dr inż. Daria Majchrowicz link otwiera się w nowej karcie ,
• dr inż. Katarzyna Karpienko link otwiera się w nowej karcie ,
• dr hab. inż. Michał Sobaszek link otwiera się w nowej karcie ,
• prof. dr hab. inż. Małgorzata Szczerska link otwiera się w nowej karcie