Repozytorium publikacji - Politechnika Gdańska

The article presents the results of experimental examination of the wood chip suction system in the existing sliding table saw before and after its modifi cation. The studies focused on the extraction hood of the mentioned system. The methodical experimental research of the pressure distribution inside the hood during wood chip removal for the selected rotational speed of saw blades of 3500 and 6000 min-1 with a diameter of 300 mm and 450 mm were carried out. The analysis of the results allowed estimating the areas with insufficient vacuum pressure hindering the organized transport of wood chips in the sliding table saw. That pressure was the main factor infl uencing the decision to adjust the hood construction. To achieve the efficient performance, several changes in the hood geometry were implemented. The results obtained from the experiments were used at the stage of shape modifi cation of the extraction hood. As a result, a new design of the chip suction system was obtained, vastly improving the chip extraction from the tool.

Autorzy

• dr hab. inż. Jacek Barański link otwiera się w nowej karcie ,
• dr inż. Marcin Jewartowski link otwiera się w nowej karcie ,
• dr hab. inż. Jan Wajs link otwiera się w nowej karcie ,
• prof. dr hab. inż. Kazimierz Orłowski link otwiera się w nowej karcie ,
• mgr inż. Tomasz Pikała