This paper focuses on the synthesis route and electrochemical properties of electrocatalytic material based on gold nanoparticles (NPs) embedded in a structured titanium template obtained via optimized anodization, chemical etching and laser processing. SEM inspection reveals the presence of Au NPs (60–90 nm in diameter) sited in the titanium foil cavities. Performed electrochemical measurements enable nomination of the set of working laser parameters that allow for fabrication of material possessing the highest performance towards glucose oxidation. It is proven that laser-engineered electrodes have an improved stability in acidic conditions and higher response from glucose oxidation in both alkaline and neutral environment in comparison to analogs obtained by conventional furnace dewetting. In neutral electrolyte it is also observed that the current density increases by almost 300% while the change in mechanism of glucose oxidation was identified due to laser treatment. It is suggested that laser dewetted gold nanoparticles have more surface defects than furnace dewetted ones so that more AuOHads species are created and therefore catalytic activity of the material is enhanced. These results indicate a scalable and cost-effective fabrication route and are important for the current research on nonenzymatic glucose sensors.
Autorzy
- mgr inż. Adrian Olejnik link otwiera się w nowej karcie ,
- prof. Gerard Śliwiński,
- dr hab. inż. Jakub Karczewski link otwiera się w nowej karcie ,
- dr hab. inż. Jacek Ryl link otwiera się w nowej karcie ,
- Katarzyna Siuzdak,
- Katarzyna Grochowska
Informacje dodatkowe
- DOI
- Cyfrowy identyfikator dokumentu elektronicznego link otwiera się w nowej karcie 10.1016/j.apsusc.2020.148788
- Kategoria
- Publikacja w czasopiśmie
- Typ
- artykuły w czasopismach
- Język
- angielski
- Rok wydania
- 2021