Repozytorium publikacji - Politechnika Gdańska

The paper presents both non-destructive and destructive experimental tests on steel-reinforced concrete beams subjected to electrochemical corrosion. To examine the condition and behavior of the specimens, destructive tests were carried out, i.e., a three-point bending together with a modulated ultrasonic wave test. In addition, a series of non-destructive experiments were conducted, such as the potential measurement method, low-frequency vibrations, and ultrasonic wave propagation. A three-point bending test was conducted to examine the behavior of specimens under applied quasi-static force, together with a modulated ultrasonic wave test. The force-displacement relation, capacity, failure displacement, flexural stiffness, and failure mode were determined for each specimen. A modulated ultrasonic wave test was also performed during the flexural test. Prior to this, the specimens were visually inspected to check if any cracks occurred and a series of non-destructive tests such as potential measurement, low-frequency vibrations, and ultrasonic wave propagation were then performed.

Autorzy

• dr inż. Tomasz Ferenc link otwiera się w nowej karcie ,
• dr inż. Erwin Wojtczak link otwiera się w nowej karcie ,
• mgr inż. Błażej Meronk link otwiera się w nowej karcie ,
• prof. dr hab. inż. Magdalena Rucka link otwiera się w nowej karcie