Repozytorium publikacji - Politechnika Gdańska

There are three main methods of underwater welding: dry, wet and intermediate between them, by using the local dry chamber. Due to low costs, the most common method is the wet welding with the use of covered electrodes. Water as a welding environment carries out a lot of problems. The first is limited visibility and instability of the welding arc. The biggest problem during underwater welding is high susceptibility to cold cracking, resulting from the increased diffusible hydrogen content in deposited metal and high stress values. In the work, Tekken joints from S355J2C+N steel were made in air and in water environment. The joints were subjected to non-destructive visual (VT) and penetrant (PT) tests. Then, macroscopic tests and hardness measurements were performed. The results confirm the literature reports that the water environment causes an increase in hardness in the heat affected zone (HAZ), which promotes the formation of cracks in welding joints.

Autorzy

• dr hab. inż. Jacek Tomków link otwiera się w nowej karcie ,
• mgr inż. Anna Janeczek link otwiera się w nowej karcie