In this paper the influence of tack welds distribution and welding sequence on angular distortion of the Tungsten Inert Gas (TIG) welded joint was tested. Additionally, the effect of welding current on angular distortion was assessed. For research X2CrTiNb18 (AISI 441) stainless steel (2.5 mm thick) was chosen. During research specimens were prepared with different distributionsof tack welds. Then they were welded by different welding sequenceswith the use of different welding current values. After welding the angular distortion of each specimen was measured by using thecoordinate measuring machine. In the next step specimens were cut. Cross-sections were polished and the metallographic macroscopic testing was conducted to check the geometry of performed welds. Performed experiments allowed determining the optimal tack weld sequence and welding parameters for welding thin stainless steel sheets.
Autorzy
- dr hab. inż. Jacek Tomków link otwiera się w nowej karcie ,
- Konrad Sobota link otwiera się w nowej karcie ,
- dr inż. Sławomir Krajewsk
Informacje dodatkowe
- DOI
- Cyfrowy identyfikator dokumentu elektronicznego link otwiera się w nowej karcie 10.22190/fume200520044t
- Kategoria
- Publikacja w czasopiśmie
- Typ
- artykuły w czasopismach
- Język
- angielski
- Rok wydania
- 2020
