Publications Repository - Gdańsk University of Technology

Page settings

polski
Publications Repository
Gdańsk University of Technology

Show publications from the year

Recent items

  • Synergistic effects of a swirl generator and MXene/ water nanofluids used in a heat exchanger pipe of a negative CO2 emission gas power plant
    • Milad Amiri
    • Paweł Ziółkowski
    • Dariusz Mikielewicz
    2024 NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

    focus on optimizing heat exchangers contributes to improved temperature control mechanisms, ensuring the sustainable operation of innovative power plants working towards negative CO2 emissions. In the realm of oxy-combustion within Negative CO2 Emission Power Plants (nCO2PP), the temperature of combustion products surpasses 3000 (K). Addressing this challenge, the imperative arises to reduce these elevated temperatures to a manageable 1100(°C). This critical cooling process is achieved through the injection of water, facilitated by the implementation of heat exchangers. The study delves into the optimization of heat transfer within the heat exchanger pipe, specifically tailored for the context of a Negative CO2 Emission Power Plant. Employing a numerical simulation, the investigation explores the impact of vortex generator geometry, vane angles, single and dual propeller-type swirl generators, and the integration of a novel class of fluid, MXene/water nanofluid. Initially, the study scrutinizes propeller-type geometry at vane angles spanning from 15 to 60 degrees. The enhanced swirl flow associated with lower vane angles leads to improved fluid mixing, fostering more effective heat transfer. Results showed that the 15-degree vane angle, with a wider circumferential coverage, may result in increased wall contact, influencing heat transfer efficiency. Subsequently, at Re=6000, incremental rates of the Nusselt number ((〖Nu〗_n-〖Nu〗_s)/〖Nu〗_s %), for θ=15, 30, 45, and 60 degrees are 175.1%, 108.8%, 90.7%, and 40.3%, respectively. Also, the increment rates of Friction Factor (f_n/f_s ) for aforementioned vane angle are 38.48%, 9.26%, 4.08%, and 2.42%, respectively. In addition, for ∅_MXene=0.5 %, the Nusselt number experiences considerable increments of 22.94%, 24.17%, 24.70%, and 24.707% at Reynolds numbers of 6000, 12000, 18000, and 24000, respectively, compared to pure water, emphasizing the potential of MXene to enhance heat transfer efficiency.

  • Synteza i charakterystyka „zielonych” mieszanin polimerowych na bazie biopochodnego termoplastycznego poliuretanu i octanomaślanu celulozy
    • Ewa Głowińska
    • Joanna Smorawska
    • Joanna Niesiobędzka
    • Julia Grocholska
    • Janusz Datta
    2024 Przemysł Chemiczny

    Otrzymano mieszaniny polimerowe z biopochodnego termoplastycznego poliuretanu (TPU) i dostępnego handlowo octanomaślanu celulozy (CAB), stosowanego w ilości 0–20%. TPU syntezowano metodą prepolimerową z wykorzystaniem biopoliolu, glikolu 1,3-propylenowego i diizocyjanianu heksametylenu. Materiały poddano analizie pod kątem struktury chemicznej (FTIR), właściwości termicznych (TGA, DSC) i właściwości termomechanicznych (DMTA).

  • Synteza małocząsteczkowych pochodnych 2-pirydonu wykazujących właściwości przeciwnowotworowe oraz przeciwbakteryjne
    • Małgorzata Ryczkowska
    2024 Full text

    Tematyka i cel badawczy niniejszej rozprawy doktorskiej dotyczy syntezy chemicznej związków heterocyklicznych z grupy 2-pirydonu wykazujących potencjał przeciwbakteryjny oraz przeciwnowotworowy. W części teoretycznej podjęto tematykę znanych fluorochinolonów oraz chinolonów wykazujących aktywność przeciwnowotworową. Dodatkowo przedstawiono nowe metody syntezy chinolonów niewymagające stosowania katalizatorów metali przejściowych oraz opublikowane na przestrzeni ostatnich 15 lat. W części badań własnych przedstawiono syntezę arylokarbamoilowych pochodnych 4-fenylo-5,6,7,8-tetrahydrochinolin-2(1H)-onu oraz badania mające na celu poznanie mechanizmu demetylowania podczas acylowania 2-metoksy-5,6,7,8-tetrahydrochinolin-8-olu izocyjanianami fenylowymi. Przedstawiono w niej również syntezę 4-fenylo-5,6,7,8-tetrahydrochinolin-2(1H)-onów modyfikowanych w pozycji 3 podstawnikami typu benzylowego. Ponadto opisano nową metodę syntezy typu „one-pot” rdzeni 4-fenylo-5,6,7,8-tetrahydrochinolin-2(1H)-onu, zbadano mechanizm powstawania trójcyklicznych pochodnych oraz przedstawiono funkcjonalizację pilicydu grupami o charakterze hydrofilowym. W części eksperymentalnej przedstawiono procedury syntezy oraz analizę spektralną wszystkich otrzymanych związków.

  • Synthesis and physical properties of Sm2PdGe3 in a context of RE2PdGe3 family
    • Leszek Litzbarski
    • Marcin Łapiński
    • Tomasz Klimczuk
    • Michał Winiarski
    2024 JOURNAL OF SOLID STATE CHEMISTRY

    In this study, we present the crystallographic and magnetic characterization of a new intermetallic compound Sm2PdGe3, which was synthetized by a two stage method employing an eutectic alloy. The investigations carried out exhibited, that Sm2PdGe3 crystallize in AlB2-type structure with lattice parameters a = 4.2189(1) Å and c = 4.1031(2) Å. This compound can be classified as a cluster-glass with a spin freezing temperature Tf = 10.5 K. Furthermore, there were carried out the analysis of the role of the rare earth (RE) elements on the structural parameters of RE2PdGe3 and draw a correlation between the RE radius and the unit cell parameters. We show that a deviation from the ideal 1:3 Pd:Ge ratio is necessary to synthesize RE2PdGe3 with smaller RE elements.

  • Synthesis, characterization and application of cross-linked functional terpolymer through epoxy group as sorbent for extraction of cadmium from waters and foods: Multivariate optimization
    • Ersen Yılmaz
    • Ali Boztuğ
    • Hameed Haq
    • Grzegorz Boczkaj
    • Nail Altunay
    2024 FOOD CHEMISTRY

    The purpose of this study was to develop a selective sorbent for cadmium ions (Cd(II)) enrichment in orbital shaker assisted solid phase microextraction (OS-SPME) from different aqueous and food samples. A maleic anhydride-styrene-glycidyl methacrylate (MA-St-GMA) terpolymer was synthesized and characterized in detail. Experimental variables of sample preparation step were optimized using a central composite design (CCD). The final determination step was performed using flame atomic absorption spectroscopy (FAAS). The MA-St-GMA sorbent exhibited a high adsorption capacity (195.9 mg g−1) for the Cd(II) ion. The developed method under optimal conditions provides satisfactory performance and a significant improvement compared to other protocols available in the literature. The linear range and detection limit of the method is 0.1–130 ng mL−1 and 0.03 ng mL−1, respectively. The robustness, intraday/interday precision, selectivity, and accuracy of the method were investigated. To further validate the method, a dedicated series of analysis was performed using certified reference materials (CRMs). This part of the study confirmed the applicability of the method for routine analysis. The OS-SPME-FAAS method was validated using water and food samples. Relative standard deviations and recovery for real-world samples were in ranges 1.7–2.2 % and 95.5–98.5 %, respectively. As a result, the MA-St-GMA sorbent showed that it could quantitatively extract Cd(II) ions from aqueous solution.

  • Synthesis of Trehalose by the Erythritol-Producing Yeast Yarrowia lipolytica Co-Displaying Maltooligosyltrehalose Synthase and Maltooligosyltrehalose Trehalohydrolase
    • Shuo Xu
    • Yawen Zou
    • Liyun Ji
    • Muhammad Bilal
    • Hairong Cheng
    2024 ACS Sustainable Chemistry & Engineering

    Industrial trehalose production faces economic challenges with costly enzyme preparations, prompting the exploration of eco-friendly alternatives. Here, we established a coupled functional sugar production line leveraging erythritolproducing cells as an innovative enzyme preparation for trehalose synthesis. The erythritol-producing Yarrowia lipolytica was modified to express a fusion protein consisting of maltooligosyltrehalose synthase and maltooligosyltrehalose trehalohydrolase from Sulfolobus solfataricus ATCC35092. The engineered strain YlxsT08 was used for the simultaneous synthesis of erythritol and the fusion protein. The yield, production, and productivity of erythritol reached 0.55 g/g of glucose, 166.18 g/L, and 1.98 g/(L· h), respectively, in a 5 L bioreactor. The recycled cells (49.77 U/ mg of DCW) exhibited a high catalytic efficiency in the bioconversion of maltodextrin to generate trehalose. The yield, production, and productivity of trehalose reached 0.67 g/g maltodextrin, 134.40 g/L, and 5.60 g/(L·h), respectively, in a 5 L bioreactor. The byproducts were removed by biological purification, and the resulting cells were recycled as catalysts for at least the next 5 rounds of trehalose production. Our novel strategy provides an ecologically sustainable and economically feasible alternative to enzyme combinations in trehalose production, offering a cost-effective and eco-friendly enzyme manufacturing method.

  • System oceny efektywności użytkowania aparatów słuchowych
    • Piotr Szymański
    2024 Full text

    Celem rozprawy jest opracowanie metody oceny efektywności protezowania słuchu przy użyciu aparatów słuchowych, która pozwoli w łatwy sposób poddawać ocenie korzyść z użytkowania protez słuchowych w najbardziej typowych sytuacjach akustycznych. Przedstawiono genezę podjętych badań i na tej podstawie zaproponowano cele i tezy rozprawy doktorskiej. W pracy w pierwszej kolejności zawarto przegląd dotyczący rodzajów ubytku słuchu i jego wpływu na jakość życia, rozwiązania wspomagające osoby z ubytkiem słuchu oraz stosowane metody oceny efektywności użytkowania aparatów słuchowych. Wybrane metody omówiono zgodnie ze stanem wiedzy, ze szczególnym uwzględnieniem kwestionariusza APHAB (Abbreviated Profile of Hearing Aid Benefit), który jest jedną z najważniejszych i najczęściej aktualnie stosowanych metod dopasowania aparatów słuchowych. W celu realizacji badań i zebrania danych przygotowano aplikację internetową, która została wdrożona w około 200 punktach protetycznych. Uzyskane dane poddano analizie statystycznej. Analiza wykorzystująca test MUSHRA (MUltiple Stimuli with Hidden Reference and Anchor) oraz wnioskowanie regułowe oparte na logice rozmytej stała się podstawą modyfikacji zaproponowanego systemu. We wnioskach odniesiono się do tez badawczych, wdrożenia zaproponowanej metody, jak również podano kierunki rozwoju prowadzonych badań.

  • Szlifowanie na docierarkach sposobem zmniejszenia skażenia powierzchni ziarnami ściernymi w obróbce wykończeniowej
    • Adam Barylski
    2024 Dozór Techniczny

    W artykule przedstawiono szkodliwość skażenia powierzchni mikroziarnami ściernymi w procesach docierania luźnym ścierniwem żeliwa szarego oraz sferoidalnego. Omówiono technologie szlifowania powierzchni płasko-równoległych z kinematyką docierania obiegowego, jako sposób zmniejszenia skażenia powierzchni ścierniwem po obróbce wykończeniowej.

  • Szlifowanie powierzchni płasko-równoległych z kinematyką docierania
    • Adam Barylski
    2024 Projektowanie i Konstrukcje Inżynierskie

    Przedstawiono charakterystykę szlifowania powierzchni płasko-równoległych z kinematyką docierania obiegowego. Analizowano obróbkę materiałów konstrukcyjnych na docierarkach dwutarczowych. Porównano warunki i wyniki szlifowania z tradycyjnym docieraniem luźnym ścierniwem. Scharakteryzowano sposób wyrównywania powierzchni roboczych narzędzi oraz omówiono główne zalety szlifowania na docierarkach.

  • Tailoring Defects in B, N-Codoped Carbon Nanowalls for Direct Electrochemical Oxidation of Glyphosate and its Metabolites
    • Mattia Pierpaoli
    • Paweł Jakóbczyk
    • Mateusz Ficek
    • Bartłomiej Dec
    • Jacek Ryl
    • Bogdan Rutkowski
    • Aneta Lewkowicz
    • Robert Bogdanowicz
    2024 Full text ACS Applied Materials & Interfaces

    Tailoring the defects in graphene and its related carbon allotropes has great potential to exploit their enhanced electrochemical properties for energy applications, environmental remediation, and sensing. Vertical graphene, also known as carbon nanowalls (CNWs), exhibits a large surface area, enhanced charge transfer capability, and high defect density, making it suitable for a wide range of emerging applications. However, precise control and tuning of the defect size, position, and density remain challenging; moreover, due to their characteristic labyrinthine morphology, conventional characterization techniques and widely accepted quality indicators fail or need to be reformulated. This study primarily focuses on examining the impact of boron heterodoping and argon plasma treatment on CNW structures, uncovering complex interplays between specific defect-induced three-dimensional nanostructures and electrochemical performance. Moreover, the study introduces the use of defect-rich CNWs as a label-free electrode for directly oxidizing glyphosate (GLY), a common herbicide, and its metabolites (sarcosine and aminomethylphosphonic acid) for the first time. Crucially, we discovered that the presence of specific boron bonds (BC and BN), coupled with the absence of Lewis-base functional groups such as pyridinic-N, is essential for the oxidation of these analytes. Notably, the D+D* second-order combinational Raman modes at ≈2570 cm–1 emerged as a reliable indicator of the analytes’ affinity. Contrary to expectations, the electrochemically active surface area and the presence of oxygen-containing functional groups played a secondary role. Argon-plasma post-treatment was found to adversely affect both the morphology and surface chemistry of CNWs, leading to an increase in sp3-hybridized carbon, the introduction of oxygen, and alterations in the types of nitrogen functional groups. Simulations support that certain defects are functional for GLY rather than AMPA. Sarcosine oxidation is the least affected by defect type.

  • Tailor-Made Polysaccharides for Biomedical Applications
    • Mohsen Khodadadiyazdi
    • Farzad Seidi
    • Aleksander Hejna
    • Payam Zarrintaj
    • Navid Rabiee
    • Justyna Kucińska-Lipka
    • Mohammad Saeb
    • Sidi A. Bencherif
    2024 ACS Applied Bio Materials

    Polysaccharides (PSAs) are carbohydrate-based macromolecules widely used in the biomedical field, either in their pure form or in blends/nanocomposites with other materials. The relationship between structure, properties, and functions has inspired scientists to design multifunctional PSAs for various biomedical applications by incorporating unique molecular structures and targeted bulk properties. Multiple strategies, such as conjugation, grafting, cross-linking, and functionalization, have been explored to control their mechanical properties, electrical conductivity, hydrophilicity, degradability, rheological features, and stimuli-responsiveness. For instance, custom-made PSAs are known for their worldwide biomedical applications in tissue engineering, drug/gene delivery, and regenerative medicine. Furthermore, the remarkable advancements in supramolecular engineering and chemistry have paved the way for mission-oriented biomaterial synthesis and the fabrication of customized biomaterials. These materials can synergistically combine the benefits of biology and chemistry to tackle important biomedical questions. Herein, we categorize and summarize PSAs based on their synthesis methods, and explore the main strategies used to customize their chemical structures. We then highlight various properties of PSAs using practical examples. Lastly, we thoroughly describe the biomedical applications of tailor-made PSAs, along with their current existing challenges and potential future directions.

  • Targeting shelterin proteins for cancer therapy.
    • Wioletta Brankiewicz-Kopcinska
    • Anoop Kallingal
    • Radosław Krzemieniecki
    • Maciej Bagiński
    2024 DRUG DISCOVERY TODAY

    As a global health challenge, cancer prompts continuous exploration for innovative therapies that are also based on new targets. One promising avenue is targeting the shelterin protein complex, a safeguard for telomeres crucial in preventing DNA damage. The role of shelterin in modulating ataxia- telangiectasia mutated (ATM) and ataxia-telangiectasia and Rad3-related (ATR) kinases, key players in the DNA damage response (DDR), establishes its significance in cancer cells. Disrupting these defence mechanisms of shelterins, especially in cancer cells, renders telomeres vulnerable, potentially leading to genomic instability and hindering cancer cell survival. In this review, we outline recent approaches exploring shelterins as potential anticancer targets, highlighting the prospect of developing selective molecules to exploit telomere vulnerabilities toward new innovative cancer treatments.

  • Targeting yeast topoisomerase II by imidazo and triazoloacridinone derivatives resulting in their antifungal activity
    • Kamila Rząd
    • Iwona Gabriel
    • Ewa Paluszkiewicz
    • Aleksandra Kuplińska
    • Mateusz Olszewski
    • Agnieszka Chylewska
    • Aleksandra M. Dąbrowska
    • Katarzyna Kozłowska-Tylingo
    2024 Full text Scientific Reports

    Fungal pathogens are considered as serious factors for deadly diseases and are a case of medical concern. Invasive fungal infections also complicate the clinical course of COVID-19, leading to a significant increase in mortality. Furthermore, fungal strains' multidrug resistance has increased the demand for antifungals with a different mechanism of action. The present study aimed to identify antifungal compounds targeting yeast topoisomerase II (yTOPOII) derived from well-known human topoisomerase II (hTOPOII) poisons C-1305 and C-1311. Two sets of derivatives: triazoloacridinones (IKE1-8) and imidazoacridinones (IKE9-14) were synthetized and evaluated with a specific emphasis on the molecular mechanism of action. Our results indicated that their effectiveness as enzyme inhibitors was not solely due to intercalation ability but also as a result of influence on catalytic activity by the formation of covalent complexes between plasmid DNA and yTOPOII. Lysine conjunction increased the strength of the compound's interaction with DNA and improved penetration into the fungal cells. Triazoloacridinone derivatives in contrast to starting compound C-1305 exhibited moderate antifungal activity and at least twice lower cytotoxicity. Importantly, compounds (IKE5-8) were not substrates for multidrug ABC transporters whereas a derivative conjugated with lysine (IKE7), showed the ability to overcome C. glabrata fluconazole-resistance (MIC 32–64 µg mL−1).

  • Teaching of Robot Arm Programming - Tasks with Increasing Difficulty
    • Marek Chodnicki
    • Alina Guzik
    • Marek Galewski
    • Wiktor Sieklicki
    • Michał Mazur
    2024

    The article describes education techniques using robotics. For example, educational exercises on programming the Nachi MZ04 robotic arm are presented. The exercises use a wooden railroad toy model and elements printed in additive manufacturing technology. The exercises have increasing difficulty and can be used to educate young people in high school and specialized higher engineering studies (both bachelor's and master's).

  • Techno-economic analysis of a hybrid energy system for electrification using an off-grid solar/biogas/battery system employing HOMER: A case study in Vietnam
    • Van Bac Nguyen
    • Prabhakar Sharma
    • Bhaskor Jyoti Bora
    • Thi Minh Tu Bui
    • Cristina Efremov
    • Minh Ho Tran
    • Jerzy Kowalski
    • Sameh M. Osman
    • Dao Nam Cao
    • Van Huong Dong
    2024 PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

    The electrification of off-grid /island villages is a critical step towards improving the techno-economic circumstances of rural regions and the overall general growth of the country. However, consistent supply from a single source is not possible in these areas. Thus, a hybrid renewable energy system performs better in these conditions. The research challenge now is to identify the optimal combinations of HRES from the available resources in a specific village site that can supply the power demand sustainably and to determine whether this is a cost-effective option. The present work is an endeavour to develop a sustainable and dynamic energy demandsupply model using HOMER Pro energy software in a specified off-grid rural site in Vietnam. The research presents four unique configurations of a combined energy system for Vietnam’s island settlements, incorporating biomass-based biogas facilities, photovoltaic panels, lithium-ion batteries, and converters. Homer Pro was used for optimization and design, focusing on key performance measures such as cost of energy, net present cost, initial cost, operating cost, renewable fraction, and carbon emissions. The best HES system layout includes a 100- kW biomass-based generator, 2.62 kW photovoltaic installation, 10 lithium-ion batteries, and a 6.31 kW converter, producing 100 % renewable energy. The system’s low cost of energy ($0.48), and net present cost ($25,730.89) make it an economically viable alternative, while its low CO2 emissions demonstrate its commitment to reducing greenhouse gas emissions.

  • Technological solutions to landfill management: Towards recovery of biomethane and carbon neutrality
    • Hussein Al-Hazmi
    • Gamal K. Hassan
    • Tonni Agustiono Kurniawan
    • Bogna Śniatała
    • Tomy M. Joseph
    • Joanna Majtacz
    • Grzegorz Piechota
    • Xiang Li
    • Fatma A. El-Gohary
    • Mohammad Saeb
    • Jacek Mąkinia
    2024 JOURNAL OF ENVIRONMENTAL MANAGEMENT

    Inadequate landfill management poses risks to the environment and human health, necessitating action. Poorly designed and operated landfills release harmful gases, contaminate water, and deplete resources. Aligning landfill management with the Sustainable Development Goals (SDGs) reveals its crucial role in achieving various targets. Urgent transformation of landfill practices is necessary to address challenges like climate change, carbon neutrality, food security, and resource recovery. The scientific community recognizes landfill management's impact on climate change, evidenced by in over 191 published articles (1998–2023). This article presents emerging solutions for sustainable landfill management, including physico-chemical, oxidation, and biological treatments. Each technology is evaluated for practical applications. The article emphasizes landfill management's global significance in pursuing carbon neutrality, prioritizing resource recovery over end-of-pipe treatments. It is important to note that minimizing water, chemical, and energy inputs in nutrient recovery is crucial for achieving carbon neutrality by 2050. Water reuse, energy recovery, and material selection during manufacturing are vital. The potential of water technologies for recovering macro-nutrients from landfill leachate is explored, considering feasibility factors. Integrated waste management approaches, such as recycling and composting, reduce waste and minimize environmental impact. It is conclusively evident that the water technologies not only facilitate the purification of leachate but also enable the recovery of valuable substances such as ammonium, heavy metals, nutrients, and salts. This recovery process holds economic benefits, while the conversion of CH4 and hydrogen into bioenergy and power generation through microbial fuel cells further enhances its potential. Future research should focus on sustainable and cost-effective treatment technologies for landfill leachate. Improving landfill management can mitigate the adverse environmental and health effects of inadequate waste disposal.

  • Temperature Measurements at Tyre Tread Rubber on Sandpaper Oscillatory Sliding Contacts Using Acicular Grindable Thermocouples
    • Oleksii Nosko
    • Yurii Tsybrii
    • Pablo Guillermo Torrelio Arias
    • Adolfo Senatore
    2024 Full text TRIBOLOGY LETTERS

    The tribological performance of tyre–road contacts depends crucially on the contact temperature. This study investigates the reliability and accuracy of acicular grindable thermocouples possessing an original needle-shaped wearable part as applied to measuring temperature at the oscillatory sliding contact between a rubber tyre tread sample and a sandpaper. A linear oscillatory tribometer is used to imitate the sliding phase of tyre–road contact under mild friction conditions. It is shown that the acicular grindable thermocouple measurements are generally test–retest repeatable. Moreover, the thermocouple signal becomes more stable with increasing contact pressure. Compared to the conventional thermocouple technique, the acicular grindable thermocouple overestimates temperature at the rubber friction surface by about 23% due to involvements of its wearable part in friction with the sandpaper. The findings suggest an expansion of the acicular grindable thermocouple technique to full-scale experiments with tyres on the road.

  • Teoria grafów wczoraj i dziś
    • Marek Kubale
    2024

    W pracy naszkicowano kamienie milowe teorii grafów poczynając od pierwszego artykułu Eulera na temat mostów w Królewcu z połowy 18. wieku. Następnie opisano słynny problem 4 barw i jego wariacje. Pracę kończy charakterystyka najnowszych wyzwań teorii grafów.

  • The Application of a Mobile Unmanned Device for Monitoring Water and Sediment Pollution in the Port of Gdynia
    • Aleksandra Bojke
    • Katarzyna Galer-Tatarowicz
    • Agnieszka Flasińska
    • Andrzej Chybicki
    • Zbigniew Łubniewski
    • Jadwiga Kargol
    • Dominika Ostrowska
    • Agnieszka Cichowska
    2024 Full text Water

    Pollution in the Port of Gdynia can encompass various types of substances and contaminants that affect the quality of water and sediment in this region. Ships entering and leaving the port can release pollutants such as oil, fuel, waste, and chemicals into the water. Controlling and monitoring these pollutants is a crucial part of environmental stewardship. In recent years, uncrewed units have been increasingly in use for in situ water and sediment sampling. Boat-based water sampling crews face significant safety risks at sea. Eliminating the need for a boat-based sampling crew, uncrewed units allow sampling from locations that are difficult to access by traditional sampling methods. To validate the HydroDron-1 method, water samples and bottom sediments were collected from five basins in the Port of Gdynia using the HydroDron-1 method and accredited sampling methods. The values of measured parameters were similar for both methods. Using the HydroDron-1 method at the Port of Gdynia has the potential to improve safety while reducing sampling costs and increasing data collection. The project was implemented as part of the POLNOR 2019 Call program, announced by the National Center for Research and Development (NCRD): “Marine port surveillance and observation system using mobile unmanned research units” NOR/POLNOR/MPSS/0037/2019.

  • The Application of Fluidic Sealing in Shrouded Gas Turbine Blades
    • Filip Wasilczuk
    • Paweł Flaszyński
    • Piotr Doerffer
    • Krzysztof Marugi
    • Tomasz Borzęcki
    2024 JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME

    This paper presents a study conducted on a new gas turbine designed to limit leakage in the labyrinth seal. The slots in the fin are used to generate a bypass flow, which obstructs the flow in the gap above the fin. The method was tested numerically and experimentally beforehand using a simplified model without rotation or blade passages. In this paper, the validation of the method using a model of a turbine stage is shown. Reynolds-averaged Navier–Stokes simulations using two turbulence models—Spalart–Allmaras (SA) and k-ω EARSM—were conducted. Comparisons of leakage flow and stage efficiency for reference and fluidic sealing configurations are presented. Fluidic sealing configuration is effective and reduces the leakage flow by 13–18.5% (depending on the turbulence model). The analysis of the flow structure in the seal region revealed that the use of fluidic sealing resulted in significant circumferential flow anisotropy.

  • The “autumn effect” in the gold market—does it contradict the Adaptive Market Hypothesis?
    • Marcin Potrykus
    • Urszula Augustynowicz
    2024 Full text International Journal of Management and Economics

    The present study aims to verify the autumn effect in the gold market, first presented 10 years ago by Dirk Baur in the paper “The autumn effect of gold” and to investigate the calendar effects occurring for other precious metals. This empirical research is presented in a way to place the results obtained in the context of the Efficient Market Hypothesis (EMH) and the more current Adaptive Market Hypothesis (AMH). The study was conducted as an extended reproduction of the Baur study. The main conclusion is that, the autumn effect on the gold market has been reversed and replaced by the winter effect, which is linked to the AMH. An equally interesting calendar effect was observed for silver. Platinum and palladium saw an increase in prices in January, but given the patterns in the gold market, it is very likely that this phenomenon will also change over time.

  • The Belt and Road Initiative and export variety: 1996–2019
    • Yuxin Lu
    • Joanna Wolszczak-Derlacz
    2024 Asian-Pacific Economic Literature

    This study examines the association between the Belt and Road Initiative (BRI) and export variety (EV). We propose three hypotheses on how BRI may foster export markets (destinations) or export product lines. The estimates are based on a dataset constructed specifically for this analysis, covering 183 countries and linked with trade data from 1996 to 2019. We apply the instrumental variable (IV) approach in regressions for covering the endogeneity. The results indicate that participation in BRI is negatively related to EV. Specifically, we find evidence that, on average, BRI participants have less EV (by product and by destination) and greater export concentration. As regards participation in the Asian Infrastructure Investment Bank and BRI meanwhile (AIIB_BRI and AIIB_MOU), the results show a more negative effect. And there are heterogeneous effects of BRI across different economies and sectors

  • The bile salt/phospholipid ratio determines the extent of in vitro intestinal lipolysis of triglycerides: Interfacial and emulsion studies
    • Katarzyna Kłosowska
    • Teresa Del Castillo Santaella
    • Julia Maldonado-Valderrama
    • Adam Macierzanka
    2024 FOOD RESEARCH INTERNATIONAL

    This study focused on the protein-stabilised triglyceride (TG)/water interfaces and oil-in-water emulsions, and explored the influence of varying molar ratios of bile salts (BSs) and phospholipids (PLs) on the intestinal lipolysis of TGs. The presence of these two major groups of biosurfactants delivered with human bile to the physiological environment of intestinal digestion was replicated in our experiments by using mixtures of individual BSs and PLs under in vitro small intestinal lipolysis conditions. Conducted initially, retrospective analysis of available scientific literature revealed that an average molar ratio of 9:4 for BSs to PLs (BS/PL) can be considered physiological in the postprandial adult human small intestine. Our experimental data showed that combining BSs and PLs synergistically enhanced interfacial activity, substantially reducing oil-water interfacial tension (IFT) during interfacial lipolysis experiments with pancreatic lipase, especially at the BS/PL–9:4 ratio. Other BS/PL molar proportions (BS/PL–6.5:6.5 and BS/PL–4:9) and an equimolar amount of BSs (BS–13) followed in IFT reduction efficiency, while using PLs alone as biosurfactants was the least efficient. In the following emulsion lipolysis experiments, BS/PL–9:4 outperformed other BS/PL mixtures in terms of enhancing the TG digestion extent. The degree of TG conversion and the desorption efficiency of interfacial material post-lipolysis correlated directly with the BS/PL ratio, decreasing as the PL proportion increased. In conclusion, this study highlights the crucial role of biliary PLs, alongside BSs, in replicating the physiological function of bile in intestinal lipolysis of emulsified TGs. Our results showed different contributions of PLs and BSs to lipolysis, strongly suggesting that any future in vitro studies aiming to simulate the human digestion conditions should take into account the impact of biliary PLs – not just BSs – to accurately mimic the physiological role of bile in intestinal lipolysis. This is particularly crucial given the fact that existing in vitro digestion protocols typically focus solely on applying specific concentrations and/or compositions of BSs to simulate the action of human bile during intestinal digestion, while overlooking the presence and concentration of biliary PLs under physiological gut conditions.

  • The biological role of prolyl oligopeptidase and the procognitive potential of its peptidic inhibitors from food proteins
    • Antoni Taraszkiewicz
    • Izabela Sinkiewicz
    • Agata Sommer
    • Hanna Staroszczyk
    2024 Full text CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION

    Prolyl oligopeptidase (POP) is a conserved serine protease belonging to proline-specific peptidases. It has both enzymatic and non-enzymatic activity and is involved in numerous biological processes in the human body, playing a role in e.g., cellular growth and differentiation, inflammation, as well as the development of some neurodegenerative and neuropsychiatric disorders. This article describes the physiological and pathological aspects of POP activity and the state-of-art of its peptidic inhibitors originating from food proteins, with a particular focus on their potential as cognition-enhancing agents. Although some milk, meat, fish, and plant protein-derived peptides have the potential to be applied as natural, procognitive nutraceuticals, their effectiveness requires further evaluation, especially in clinical trials. We demonstrated that the important features of the most promising POP-inhibiting peptides are very short sequence, high content of hydrophobic amino acids, and usually the presence of proline residue.

  • The chemistry, properties and performance of flame-retardant rubber composites: Collecting, analyzing, categorizing, machine learning modeling, and visualizing
    • Paulina Wiśniewska
    • Elnaz Movahedifar
    • Krzysztof Formela
    • Mohammad Naser-moghadasi
    • Henri Vahabi
    • Mohammad Saeb
    2024 COMPOSITES SCIENCE AND TECHNOLOGY

    Rubbers combine the flexibility with mechanical strength, supporting myriad applications, but suffer from inherent flammability. Formulation and production of flame-retardant rubber composites (FRRCs) have intensively been practiced over years, but not comprehensively reviewed. This necessity has outlined collecting, analyzing, screening, classifying, and interpreting the literature with the aim of classifying the FRRCs. We quantified and visualized the flame retardancy of natural and synthetic FRRCs by grouping FRRCs based on their flame retardants (FRs) among green, mineral, phosphorus-based, nitrogen-based, carbonaceous, and hybrids of two or more types. Available data on cone calorimetry, limited oxygen index (LOI), and UL-94 of FRRCs were carefully extracted and plotted. Flame Retardancy Index (FRI) was used to specify the Poor, Good, or Excellent classes of flame retardancy in association with the chemistry and concentration of FRs to broaden the future innovation avenues. Machine Learning (ML) modeling enabled visualization of flame retardancy landscapes of natural and synthetic rubbers in terms of the chemistry and concentration of FRs. Overall, a downward trend in mechanical properties of FRRCSs against FRs amount was oxplored. This study proposed a general guideline for recognizing gaps in previous investigations and mechanistic interpretations. In conclusion, we highlight that the future FRRCs should take advantage of hybridizing FRs in order to meet the fire safety requirements, which would be possible by the innovative colorful checkered flame retardancy chart presented in this survey.

  • The clamping selection method to reduce the vibration of large-size workpieces during the face milling process
    • Krzysztof Kaliński
    • Marek Galewski
    • Natalia Stawicka-Morawska
    • Krzysztof Jemielniak
    • Michał Mazur
    2024 Full text Bulletin of the Polish Academy of Sciences-Technical Sciences

    The article introduces a method for selecting the best clamping conditions to obtain vibration reduction during milling of large-size workpiece. It is based on experimental modal analysis performed for a set of assumed, fixing conditions of a considered workpiece to identify Frequency Response Functions (FRFs) for each tightening torque of the mounting screws. Simulated plots of periodically changing nominal cutting forces are then calculated. Subsequently, by multiplying FRF and spectra of cutting forces, a Clamping Selection Function (CSF) is determined and, thanks to this function, vibration Root Mean Square (RMS) is calculated resulting in Clamping Selection Indicator (CSI) that indicates the best clamping of the workpiece. The method's effectiveness was evidenced by assessing the RMS value of the vibration level observed in time domain during the real-time face milling process of an large-sized exemplary item. The proposed approach may be useful for seeking the best conditions for fixing the workpiece on the table.

  • THE CONCEPT AND THE STATE OF RESEARCH ON THE PERFORMANCE OF FAMILY BUSINESSES
    • Ewelina Sokołowska
    • Daniel Boehlich
    • Anna Dziadkiewicz
    2024 Full text Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska

    Purpose: This study's primary goal is to present the theoretical concept of family enterprises. Specifically, the results of earlier studies and the issues facing this field of research now will be described. The article also examines the underlying impacts that family control has on business management in order to fill the research gap left by earlier studies on the performance differences between family and non-family enterprises. A thorough analysis of the literature revealed that family firms place equal value on non-financial performance as they do on financial performance. Design/methodology/approach: The study's survey focuses on critical analysis methods used in the literature. Critical theoretical analysis will also be accompanied by comparative, analytical and monographic methods implied to draw conclusions on further research directions in the family business sector. Findings: The current work makes a significant contribution by broadening the theoretical foundation for family business research. Therefore, a sound foundation for the explanation of distinctive strategic management components may be established using the behavior-oriented approach, stakeholder theory, target composition, and balanced scorecard approach. Research limitations/implications: Unconfirmed theories may be examined more closely, particularly in a modified setting. Practical implications: The findings of this theoretical study are not only important for business research but also for business practice. The study is primary addressed to the top management of family and non-family businesses. Moreover, potential investors, banks and consultants could benefit from the results of this study. Originality/value: This study aims to provide a better understanding of the relationship between the variables of family influence, goal setting and selection of key performance indicators and organizational performance and business success. That is how a contribution can be made to the ongoing discussion about the success of family businesses and its underlying factors. Keywords: Family business, Goal setting, Business performance, Small and medium-sized enterprises. Category of the paper: literature review.

  • The Crowd as a Source of Knowledge - From User Feedback to Fulfilling Requirements
    • Anna Baj-Rogowska
    2024

    Crowd-based and data-intensive requirements engineering (RE) strategy is an approach for gathering and analyzing information from the general public or the so-called crowd to derive validated user requirements. This study aims to conceptualize the process of analyzing information from a crowd to achieve the fulfillment of user requirements. The created model is based on the ADO framework (Antecedents-Decisions-Outcomes). In the empirical part, we chose the Instagram mobile app and user feedback on it as a source of data for the validation of our approach. For extracting antecedents from user feedback, we applied the Latent Dirichlet Allocation (LDA), and then sentiment analysis was performed for each topic to prioritize the most urgent tasks delegated by the crowd. The main findings of our study reveal that using the wide spectrum of experience and knowledge of users (the wisdom of the crowd) from user opinions helps uncover different aspects that are helpful during software development. The conceptualization based on the ADO framework reflects and captures this process well. Thus, crowdsourcing is an alternative to traditional methods and techniques for requirements engineering.

  • The culture of excellence and its dimensions in higher education
    • Małgorzata Wiśniewska
    • Piotr Grudowski
    2024 The TQM Journal

    Purpose To recognize the existing state of knowledge on a culture of excellence (CoE) in higher education institutions (HEIs) and to define the CoE in HEI and the dimensions that make up that culture. A subsidiary goal is to propose a qualitative tool to measure CoE maturity. Design/methodology/approach The study was based on the qualitative method, the preferred reporting system of systematic reviews and meta-analysis (PRISMA). Next, the conceptual work method was used. Findings A research gap in the topic of CoE in HE has been confirmed. The CoE's own definition has been proposed, as well as a set of seven dimensions that comprise it, such as: Clear vision, mission and goals for excellence; Leadership oriented to excellence; Employee engagement; Human resources management; Meeting and exceeding student and staff expectations; Continuous improvement of processes through innovation and excellent practices; and Partnership and teamwork for improvement. Research limitations/implications The study research was limited to open-access articles. Therefore, in the future, the search can be broadened to include monographs or doctoral dissertations, and other peer-reviewed studies. The research implications are related to the originality of our work and the proposals of two concepts – a CoE model and a CoE maturity assessment tool. Practical implications Leaders at universities, e.g. rectors and deans, can take into account the identified dimensions and progressively provide them as conditions conducive to achieving above-average levels. Originality/value This is the first literature review on CoE in HEIs, which can be considered an original contribution to science and practice. The original contribution of the paper is also the proposal of a CoE conceptual model and a CoE maturity assessment tool.

  • The determinants of European universities patenting and co‑patenting with companies
    • Joanna Wolszczak-Derlacz
    2024 JOURNAL OF TECHNOLOGY TRANSFER

    This study examines the determinants of European universities patenting and co-patenting with companies. The analysis takes into account more than 400 universities from 17 countries over the period 2011–2018. We test several determinants of the commercial activity of universities, such as: student enrolment (size), age, public or private nature of the institution, students per academic staff, publications per academic staff (research orientation), non-academic staff per academic staff, funding structure (core and third-party budget) and prior patent activity. We estimate two-part models with zero-inflated negative binomial/zero-inflated beta regressions, which estimate separately the impact of the determinant of patenting (count data/proportion of joint company-university patents) and the probability of no patenting. The results indicate that the main determinants of universities patenting and co-patenting with companies are: size, age, research orientation and funding structure. As for patents per se, the determinants of starting patenting are the same as continuing patenting, while for joint company-university patents, most of the determinants differently affect starting joint-patenting than increasing the proportion of co-patents with companies in all patents

  • The Development of Toxoplasma gondii Recombinant Trivalent Chimeric Proteins as an Alternative to Toxoplasma Lysate Antigen (TLA) in Enzyme-Linked Immunosorbent Assay (ELISA) for the Detection of Immunoglobulin G (IgG) in Small Ruminants
    • Bartłomiej Tomasz Ferra
    • Maciej Chyb
    • Karolina Sołowińska
    • Lucyna Holec-Gąsior
    • Marta Skwarecka
    • Karolina Baranowicz
    • Justyna Gatkowska
    2024 INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

    This study presents an evaluation of seventeen newly produced recombinant trivalent chimeric proteins (containing the same immunodominant fragment of SAG1 and SAG2 of Toxoplasma gondii antigens, and an additional immunodominant fragment of one of the parasite antigens, such as AMA1, GRA1, GRA2, GRA5, GRA6, GRA7, GRA9, LDH2, MAG1, MIC1, MIC3, P35, and ROP1) as a potential alternative to the whole-cell tachyzoite lysate (TLA) used in the detection of infection in small ruminants. These recombinant proteins, obtained by genetic engineering and molecular biology methods, were tested for their reactivity with specific anti-Toxoplasma IgG antibodies contained in serum samples of small ruminants (192 samples of sheep serum and 95 samples of goat serum) using an enzyme-linked immunosorbent assay (ELISA). The reactivity of six recombinant trivalent chimeric proteins (SAG1-SAG2-GRA5, SAG1-SAG2-GRA9, SAG1-SAG2-MIC1, SAG1-SAG2-MIC3, SAG1-SAG2-P35, and SAG1-SAG2-ROP1) with IgG antibodies generated during T. gondii invasion was comparable to the sensitivity of TLA-based IgG ELISA (100%). The obtained results show a strong correlation with the results obtained for TLA. This suggests that these protein preparations may be a potential alternative to TLA used in commercial tests and could be used to develop a cheaper test for the detection of parasite infection in small ruminants.

  • The effect of 1,4-butanediol on the efficiency of CO2 absorption and inhibition of NH3 escape during the mineral carbonation of gypsum
    • Temesgen Amibo
    • Donata Konopacka-Łyskawa
    2024 Full text

    This study explored the optimal concentration of 1,4-butanediol for maximizing CO2 absorption and minimizing ammonia desorption. Mineral carbonation of gypsum slurry was carried out in a bubble reactor with a magnetic stirrer maintaining constant speed for 1 hour. The gas introduced to the reactor was a mixture of CO2 and air. The gas flow was controlled by the mass controllers. Gas sensors were used to determine the concentration of CO2 and NH3 in the outlet gas. The initial and final pH values were measured. The liquid phase was ammonia solutions at a concentration of 1.69 mol.dm-3 with the addition of varying concentrations of 1,4-butanediol (ranging from 0.1 to 0.5 mol. dm-3). The ratio of gypsum to liquid phase was maintained as 1:14 (kg. dm-3). Based on measured CO2 and NH3 concentrations, the efficiency of carbon dioxide absorption and the efficiency of ammonia escape inhibition were calculated.

  • The effect of aeration mode (intermittent vs. continuous) on nutrient removal and greenhouse gas emissions in the wastewater treatment plant of Corleone (Italy)
    • Giorgio Mannina
    • Paulo Marcelo Bosco Mofatto
    • Alida Cosenza
    • Daniele Trapani Di
    • Hazal Gulhan
    • Antonio Mineo
    • Jacek Mąkinia
    2024 Full text SCIENCE OF THE TOTAL ENVIRONMENT

    The paper reports the results of an experimental study aimed at comparing two configurations of a full-scale wastewater treatment plant (WWTP): conventional activated sludge (CAS) and oxic-settling-anaerobic process (OSA) with intermittent aeration (IA). A comprehensive monitoring campaign was carried out to assess multiple parameters for comparing the two configurations: carbon and nutrient removal, greenhouse gas emissions, respirometric analysis, and sludge production. A holistic approach has been adopted in the study with the novelty of including the carbon footprint (CF) contribution (as direct, indirect and derivative emissions) in comparing the two configurations. Results showed that the OSA-IA configuration performed better in total chemical oxygen demand (TCOD) and ortho-phosphate (PO4-P) removal. CAS performed better for Total Suspended Solids (TSS) removal showing a worsening of settling properties for OSA-IA. The heterotrophic yield coefficient and maximum growth rate decreased, suggesting a shift to sludge reduction metabolism in the OSA-IA configuration. Autotrophic biomass showed a reduced yield coefficient and maximum growth yield due to the negative effects of the sludge holding tank in the OSA-IA configuration on nitrification. The OSA-IA configuration had higher indirect emissions (30.5 % vs 21.3 % in CAS) from additional energy consumption due to additional mixers and sludge recirculation pumps. The CF value was lower for OSA-IA than for CAS configuration (0.36 kgCO2/m3 vs 0.39 kgCO2/m3 in CAS).

  • The effect of elevated temperature on LCF damage growth in 2024AA – Experiment and modeling
    • Anna Falkowska
    • Adam Tomczyk
    • Andrzej Seweryn
    2024 ENGINEERING FAILURE ANALYSIS

    This paper presents the results of experimental low-cycle fatigue (LCF) tests conducted on EN-AW 2024 alloy in T3511 temper at 100 ◦C, 200 ◦C and 300 ◦C. The material’s basic fatigue characteristics were determined, such as fatigue life curve and cyclic strain curve. Both the hysteresis loop and nature of fracture surfaces obtained in macro- and microscopic observations (scanning electron microscope, SEM) were accounted for. The results of tests at elevated temperature were compared with results obtained at room temperature in the authors’ previous papers. Based on the results of experimental tests, an analytical model of fatigue damage growth was proposed. In this model, it was assumed that damage accumulation mainly depends on the current normal stress and increment of plastic strain. Dependencies of the model’s parameters with respect to temperature were determined, and the model was validated experimentally. Good concurrency of the numerical simulations with the experimental results was obtained.

  • The effect of environmental turbulence on cyber security risk management and organizational resilience
    • Susanne Durst
    • Christoph Hinteregger
    • Małgorzata Zięba
    2024 Full text COMPUTERS & SECURITY

    Even though there is a plethora of research on the role of environmental turbulence in organizational performance in general, little attention has been paid to the effect of environmental turbulence on cyber security risk management and further - organizational resilience. Drawing on the resource-based view and contingency theory, this study investigates how technological and market turbulence influence organizational cyber security risk management (CSRM) and then organizational resilience. Using a data set from 150 European companies, the study findings show how the two types of turbulence have different effects on CSRM in the companies studied. Technological turbulence directly impacts the firms’ cyber security risk maturity while market turbulence has a direct positive affect on firms’ cyber security risk perception. The study also determines the interplay between risk perception and risk maturity and subsequent resilience.

  • The effect of groyne field on trapping macroplastic. Preliminary results from laboratory experiments
    • Łukasz Przyborowski
    • Zuzanna Cuban
    • Anna Łoboda
    • Małgorzata Robakiewicz
    • Stanisław Biegowski
    • Tomasz Kolerski
    2024 SCIENCE OF THE TOTAL ENVIRONMENT

    Macroplastic, a precursor of microplastic pollution, has become a new scope of research interest. However, the physical processes of macroplastic transport and deposition in rivers are poorly understood, which makes the decisions of where to locate macroplastic trapping infrastructure difficult. In this research, we conducted a series of experiments in a laboratory channel, exploring the impact of groynes and flexible artificial vegetation on the floating macroplastic litter. The goal was to investigate the litter paths with different obstruction arrangements, which was done by implementing a particle tracking technique on video recordings from each experimental run. We found that increasing discharge correlated with the number of plastic litter floating into the recirculation zone within the groyne fields, especially if the upstream groyne had an extended length. This produced a strong mixing interface between the main flow and the groyne field, while a vegetation patch added in the same groyne field changed the paths of plastic litter by deflecting the flow. We noticed that during a moderate discharge rate, the litter pieces flowing into the groyne field with the vegetation circulated there for the longest period, and some of them got entangled between floating stems when discharge was at its lowest. This phenomenon points to the conclusion that low flow velocity paired with the presence of vegetation can be a primer for plastic deposition and consequently, its degradation. The insights from the experiment allowed us to recommend a place downstream of an extended groyne as the desirable (efficient) area for installing a plastic trapping infrastructure or conducting plastic cleaning actions.

  • The Effect of Hyperbaric Storage on the Nutritional Value and Retention of Certain Bioactive Proteins in Human Milk
    • Katarzyna Mazur
    • Barbara Kusznierewicz
    • Dorota Martysiak-Żurowska
    • Izabela Drążkowska
    • Edyta Malinowska-Pańczyk
    2024 Full text Nutrients

    Human milk (HM) contains the essential macronutrients and bioactive compounds necessary for the normal growth and development of newborns. The milk collected by human milk banks is stored frozen and pasteurized, reducing its nutritional and biological value. The purpose of this study was to determine the effect of hyperbaric storage at subzero temperatures (HS-ST) on the macronutrients and bioactive proteins in HM. As control samples, HM was stored at the same temperatures under 0.1 MPa. A Miris HM analyzer was used to determine the macronutrients and the energy value. The lactoferrin (LF), lysozyme (LYZ) and α-lactalbumin (α-LAC) content was checked using high-performance liquid chromatography, and an ELISA test was used to quantify secretory immunoglobulin A (sIgA). The results showed that the macronutrient content did not change significantly after 90 days of storage at 60 MPa/−5 °C, 78 MPa/−7 °C, 111 MPa/−10 °C or 130 MPa/−12 °C. Retention higher than 90% of LYZ, α-LAC, LF and sIgA was observed in the HM stored at conditions of up to 111 MPa/−10 °C. However, at 130 MPa/−12 °C, there was a reduction in LYZ and LF, by 39 and 89%, respectively. The storage of HM at subzero temperatures at 0.1 MPa did not affect the content of carbohydrates or crude and true protein. For fat and the energy value, significant decreases were observed at −5 °C after 90 days of storage.

  • The effect of preliminary creep-strain on material behavior under LCF tension/compression and pure torsion regimes
    • Adam Tomczyk
    • Wojciech Grodzki
    • Andrzej Seweryn
    2024 INTERNATIONAL JOURNAL OF FATIGUE

    This paper presents the results of experimental tests of monotonic tension and torsion, creep-rupture and preliminary creep at 200C and 300C, as well as low-cycle fatigue of 2024 T3511 aluminum alloy. The fatigue process was conducted at room temperature for uniaxial tension/compression and torsion. The as-received material and pre-deformed material were also investigated during creep at elevated temperature. Basic monotonic, creep and fatigue characteristics of the material were determined. Detailed micro- and macroscopic analyses of fracture surfaces (scanning electron microscopy, SEM) were carried out. The influence of different creep pre-deformation histories at elevated temperature on the behavior of the studied alloy were characterized with respect to monotonic and cyclic loads at room temperature.

  • The Effect of Steaming Beech, Birch and Maple Woods on Qualitative Indicators of the Surface
    • Michal Dudiak
    • Richard Kminiak
    • Adrian Banski,
    • Daniel Chuchała
    2024 Full text Coatings

    This work presents the effect of steaming beech, birch and maple woods on the resulting quality of the milled wood surface. The steaming process of the studied woods results in a targeted change in the color of the wood, which changes from the original light white-gray color to fine reddishbrown to dark brown color shades that are more or less saturated depending on the temperature of the saturated water steam. The color changes achieved during the modification process were identified using coordinates in the CIE L*a*b* color space. The achieved color changes were described through the total color difference of ΔE* and defined through classification grades using a color scale. The technological process of wood steaming with saturated water steam for the purpose of a targeted change in the color of the wood and experimental measurements of the roughness of the milled wood surface proved that the wood steaming process has a positive effect on the roughness of the wood surface of the investigated trees, depending on the steaming temperature. The reduction of roughness in the process of the modification of beech wood compared with native wood was at the temperature of the saturated water steam as follows: tI = 105 ± 2.5 ◦C by Ra = 12.3%, at tII = 125 ± 2.5 ◦C by Ra = 15.4%, at tIII = 135 ± 2.5 ◦C by Ra = 16.9%. By modifying birch wood at tIII = 135 ± 2.5 ◦C, the roughness decreased by Ra = 13.4%; the surface roughness decreased by Ra = 15.8% compared with native wood by modifying maple wood. The roughness of the milled surface of modified wood in individual treatment modes decreased compared with native wood, which means that the milled surface of modified wood is of a better quality, which is positive for its practical use.

  • The effect of using jug-type water filters on selected metals concentration in tap water – a case study
    • Hubert Kwiatkowski
    • Ksawery Kreft
    • Oskar Ronda
    • Bartłomiej Cieślik
    2024 JOURNAL OF WATER AND HEALTH

    In this study, the effect of the filtration process on Na, K, Mg, Ca, Fe and Zn concentration in water, using filters from one of the leading European manufacturers, was investigated. The increase in Na (up to 300%) and K concentration (up to 320%) at the beginning of jug filter usage was reported. A decrease in Ca, Fe and Zn concentration was observed. Standard filters remove 80–90% of Mg from tap water at the beginning of the usage, while magnesium-enriching ones slightly increase its concentration – from around 8 to 12–25 mg/L. Significant changes in the filter’s operating characteristics were also observed for other studied elements as they wore out. Using Mg-enriching filters can increase magnesium intake from 4–5 to 6–15% of the recommended daily dose from water consumption. The results were also discussed regarding the amounts of macroelements found in commercially available bottled water. The magnesium concentration in tap water after filtration through magnesium-enriching filters was lower compared to bottled mineral waters. The authors note a scope for the development of water filter production technology, in particular, the need to develop filters that more efficiently enrich water with magnesium and do not increase sodium concentration

  • The Effect of Varying the Light Spectrum of a Scene on the Localisation of Photogrammetric Features
    • Paweł Burdziakowski
    2024 Remote Sensing

    In modern digital photogrammetry, an image is usually registered via a digital matrix with an array of colour filters. From the registration of the image until feature points are detected on the image, the image is subjected to a series of calculations, i.e., demosaicing and conversion to greyscale, among others. These algorithms respond differently to the varying light spectrum of the scene, which consequently results in the feature location changing. In this study, the effect of scene illumination on the localisation of a feature in an image is presented. The demosaicing and greyscale conversion algorithms that produce the largest and smallest deviation of the feature from the reference point were assessed. Twelve different illumination settings from polychromatic light to monochromatic light were developed and performed, and five different demosaicing algorithms and five different methods of converting a colour image to greyscale were analysed. A total of 300 different cases were examined. As the study shows, the lowest deviation in the polychromatic light domain was achieved for light with a colour temperature of 5600 K and 5000 K, while in the monochromatic light domain, it was achieved for light with a green colour. Demosaicing methods have a significant effect on the localisation of a feature, and so the smallest feature deviation was achieved for smooth hue-type demosaicing, while for greyscale conversion, it was achieved for the mean type. Demosaicing and greyscale conversion methods for monochrome light had no effect. The article discusses the problem and concludes with recommendations and suggestions in the area of illuminating the scene with artificial light and the application of the algorithms, in order to achieve the highest accuracy using photogrammetric methods.

  • The experimental and numerical investigation of fracture behaviour in PMMA notched specimens under biaxial loading conditions – Tension with torsion
    • Elżbieta Bura
    • Wojciech Grodzki
    • Andrzej Seweryn
    2024 Full text ENGINEERING FRACTURE MECHANICS

    This paper presents the results of experimental fracture test of flat PMMA specimens under biaxial loading condition tension with torsion (proportional). The specimens were made in two thicknesses: 5 and 15 mm and were weakened with V-type edge notches with different root radii: 0.5; 2 and 10 mm. Thanks to the ARAMIS 3D 4 M non-contact vision system, measurement of the elongation and twist angle were recorded. During experimental part all of the deformation processes were observed using PHANTOM cameras. Obtained records made it possible to precisely indicate the moment of crack initiation (tensile force and torsional moment values). Using the microscopic observations the location of crack initiations were determined. Results obtained for biaxial loading were compared with those obtained for uniaxial tension and torsion. Based on experimental data the numerical calculation with FEM were carried out. The principal stress and plastic strain distribution under critical load, were obtained. The points of occurrence of stress maxima and plastic strain were indicated, which were taken as potential crack initiation sites. On the basis of the stress and plastic strain values measured at the critical points, a stress–strain fracture criterion was formulated, which was then positively verified. Additionally, new form of stress–strain fracture criterion was proposed. The bilinear form of the fracture criterion can be successfully used to predict fracture in PMMA flat specimens, regardless of the notch root radius, type of load or element thickness.

  • The exposure to UV filters: Prevalence, effects, possible molecular mechanisms of action and interactions within mixtures
    • Alexandra Rafeletou
    • Jenni Viivi Linnea Niemi
    • Francisco Alejandro Lagunas-Rangel
    • Wen Liu
    • Błażej Kudłak
    • Helgi B. Schiöth
    2024 SCIENCE OF THE TOTAL ENVIRONMENT

    Substances that can absorb sunlight and harmful UV radiation such as organic UV filters are widely used in cosmetics and other personal care products. Since humans use a wide variety of chemicals for multiple purposes it is common for UV filters to co-occur with other substances either in human originating specimens or in the environment. There is increasing interest in understanding such co-occurrence in form of potential synergy, antagonist, or additive effects of biological systems. This review focuses on the collection of data about the simultaneous occurrence of UV filters oxybenzone (OXYB), ethylexyl-methoxycinnamate (EMC) and 4-methylbenzylidene camphor (4-MBC) as well as other classes of chemicals (such as pesticides, bisphenols, and parabens) to understand better any such interactions considering synergy, additive effect and antagonism. Our analysis identified >20 different confirmed synergies in 11 papers involving 16 compounds.

  • “The Guardians of the Truth”: Journalists’ Resistance to the Algorithmization of Journalism
    • Jan Kreft
    • Monika Boguszewicz-kreft
    • Mariana Fydrych
    2024 Full text ETHOS. KWARTALNIK INSTYTUTU JANA PAWŁA II KUL

    Regardless of the term used, be it “robot journalism,” “automated journalism,” “algorithmic journalism” or “machine-written journalism,” the process of automatic content creation and distribution is progressing in the newsrooms. Meanwhile, exercising control over the creation and distribution of news is considered a fundamental element of journalists’ professional identity. The article presents the results of research on the perception of algorithmic content creation conducted among journalists in the context of their professional values and identity. The research was conducted with a qualitative method using a semi-structured interview technique with 18 journalists employed in leading Polish media. According to the study, algorithmic journalism is perceived by journalists primarily in the context of posing a threat to the fundamental journalistic principle of providing true information: what they bring to the fore is the potential for creating and spreading fake news. The respondents, who defended their journalistic professional identity, compared the disadvantages of algorithmic journalism with the unique competences of “human” journalists, perceiving the latter as advocates of concern for the quality standards of social discourse and as “guardians of the truth”.

  • The impact of China’s One-Belt One-Road initiative on international trade and global value chains
    • Yuxin Lu
    • Joanna Wolszczak-Derlacz
    2024 Asia-Pacific Journal of Accounting & Economics

    This study examines the potential effects of China’s ‘One-Belt One-Road’initiative (OBOR) on trade flows and global value chain (GVC) connections.The empirical analysis is based on the augmented trade gravity model, which comprises 186 economies and 199 of their partners from 2000 to 2018. We also estimate the gravity model for involvement in GVC (domestic value added in intermediate exports, foreign value added in exports, and one country’s contributed value in another’s total exports). OBOR proves to be positively correlated with international trade and GVC, while some corridors seem to benefit more than others (e.g. China-Pakistan,China-Mongolia-Russian Federation, and Bangladesh-China-India-Myanmar).

  • The Impact of Different Drying Methods on the Metabolomic and Lipidomic Profiles of Arthrospira platensis
    • Marika Mróz
    • Karol Parchem
    • Joanna Jóźwik
    • M. Rosário Domingues
    • Barbara Kusznierewicz
    2024 Full text MOLECULES

    Drying is an inseparable part of industrial microalgae production. In this work, the impacts of eight different drying methods on the metabolome and lipidome of Arthrospira platensis were investigated. The studied drying methods were freeze drying (FD), sun drying (SD), air drying at 40 and 75 °C (AD′ and AD″), infrared drying at 40 and 75 °C (IRD′ and IRD″), and vacuum drying at 40 and 75 °C (VD′ and VD″). Results gathered by reversed-phase liquid chromatography separation coupled with high-resolution tandem mass spectrometry with electrospray ionization (RP-LC-ESI-Orbitrap HRMS/MS) analysis allowed researchers to identify a total of 316 metabolites (including lipids) in aqueous and ethanolic extracts. The compounds identified in ethanolic extracts were mainly lipids, such as neutral and polar lipids, chlorophylls and carotenoids, while the compounds identified in the aqueous extracts were mainly amino acids and dipeptides. Among the identified compounds, products of enzymatic and chemical degradation, such as pyropheophytins, monoacylglycerols and lysophosphatidylcholines were also identified and their amounts depended on the drying method. The results showed that except for FD method, recognized as a control, the most protective method was AD′. Contrary to this, VD′ and VD″, under the conditions used, promoted the most intense degradation of valuable metabolites.

  • The Impact of Drying Conditions on the Surface Color Changes of Pine Wood
    • Aleksandra Suchta
    • Jacek Barański
    • Tatiana Vilkovská
    • Ivan Klement
    • Peter Vilkovský
    2024 Full text BIORESOURCES

    The article presents the impact of drying process and selected parameters on the color changes on the surface of pine wood (Pinus sylvestris L.). Three predetermined process conditions (modes), mild, normal, and intensive, were investigated. The experiments were conducted using a semi-industrial scale dryer designed at the Gdańsk University of Technology with a loading capacity of 0.55 m3. The drying process was applied to pine wood grown in the northern part of Pomeranian region in Poland. The specimens were selected taking into consideration the radial angle of the growth rings. During each drying mode, 25 pieces of wood with dimensions (thickness, width, length) of 0.03 m, 0.2 m, and 1.5 m, respectively, were dried. The total color change (ΔE) after drying process and color saturation (h*) before and after drying processes of the wood surface was determined using the normalized CIELAB methods. The obtained results indicated that the color change of the pine wood surface increased simultaneously with the intensification of the drying process. However, the normalized wood quality after drying under intensive drying process conditions remained within the standard limits. The application of intensive drying process conditions remarkably changes the surface color of the obtained material, while remarkably reducing the drying process duration.

  • The Impact of Foreign Accents on the Performance of Whisper Family Models Using Medical Speech in Polish
    • Szymon Zaporowski
    2024

    The article presents preliminary experiments investigating the impact of accent on the performance of the Whisper automatic speech recognition (ASR) system, specifically for the Polish language and medical data. The literature review revealed a scarcity of studies on the influence of accents on speech recognition systems in Polish, especially concerning medical terminology. The experiments involved voice cloning of selected individuals and adding prosodic contours with Russian and German accents, followed by transcription of these samples using all available models from the Whisper family and comparison with the original transcription. The results of these initial experiments suggest that the Whisper model struggles with foreign accents in the context of Polish language and medical terminology. This highlights the need for further research aimed at improving ASR systems for foreign accents and medical terminology.

  • The impact of global value chains on wages, employment, and productivity: a survey of theoretical approaches
    • Sabina Szymczak
    2024 Full text Journal for Labour Market Research

    This study presents a systematic literature review to provide a collection of theories explaining the impact of global value chains (GVCs) on labour market outcomes. Due to the complex nature of GVCs and the interconnectedness of wages, employment, and productivity, many direct and indirect effects are at play. To ensure a transparent and systematic flow of the review process, I follow the PRISMA guide. Eventually, 36 records out of 1221 results from Scopus database were selected. This review may be useful for theorists, empirical economists, and policy makers as an overview of theoretical developments and convenient map of potential outcomes expected from involvement in GVCs. It identifies and systematizes a number of effects existing in the literature under various names. The results show that the predictions from the theory are ambiguous. The positive effects which may emerge regardless the characteristics of the GVC are the productivity-enhancing effect and the cross-effect, especially important considering growing servicification of manufacturing. Here lies the critical role of the state and policies to assure that the losses will not exceed the gains in the aggregate terms. One of the main factors shaping the outcome is the power distribution among the GVC’s firms. Additionally, this paper shows the shortcomings of the existing theories. Less aggregated levels of analysis could be a great input to the discussion, as well as addressing different GVCs’ dimensions and types of organisation. The understanding of relation between GVC position and labour market is especially worth exploration as the existing evidence adopt different and even contradicting perspectives on the definition of upgrading the GVC position.

  • The Impact of Hybrid Flame Retardant Compositions on the Performance of Foamed Flexible Polyurethane/Ground Tire Rubber Composites
    • Paulina Kosmela
    • Adam Olszewski
    • Mateusz Barczewski
    • Adam Piasecki
    • Aleksander Hejna
    2024 JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

    Current sustainability-oriented trends affect polyurethane (PU) materials and stimulate the incorporation of recycled or waste-based materials as fillers. Ground tire rubber (GTR) poses as an auspicious candidate due to the excellent performance of car tires. Despite the benefits related to the mechanical performance, it contributes to the increasing flammability of the resulting composites. Herein, presented work assessed the impact of hybrid flame retardant (FR) combinations of ammonium polyphosphate (APP) or melamine cyanurate (MC) with organophosphorus compounds on the performance of foamed flexible PU/GTR composites. Such works are of vital importance, because matching to the needs of material with the mode of action of particular FRs is quite challenging. Except for the flammability reduction, they also affect structure and performance of composites. Fire resistance was enhanced for all applied FRs compositions; however, APP was found more effective than MC due to the efficient formation of protective char layer. Moreover, introduction of MC induced heterogeneity of cellular structure and excessive stiffening of PU structure, which increased its friability and cells’ coalescence, deteriorating thermal insulation performance and damping ability.